25 Oct

After a busy/stressful month, back to working on projects.

snapped a drill bit drilling axially in to the end of oil pump drive shaft using lathe, but lucky it didn’t get stuck in the hole. hole taped, and now have 35 tooth gear mounted on oil pump. I’ll probably just add glue if it does slip under power. Waiting for the RTV liquid gasket to set again.

Used paper to “shim” the gap between motor shaft and the worm- it’s not a tight fit so will need to add glue. Now on to making the frame to mount the DC motor to the oil pump.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: